Skip to content

eBrevet Rider Guide

eBrevet is a free phone app that records your check-ins at each control, so you can ride an Arizona Randonneurs event with your phone as your brevet card. This guide covers what riders need; nothing here requires technical knowledge.

What eBrevet is

  • It checks you in at a control only when you are within about 500 m of it and the control is open.
  • It is not a tracker. It records your check-ins, nothing else. It does not run in the background and uses very little battery.
  • It works without cell service at controls. Check-ins upload when you next have signal.
  • When you finish, it gives you a finish code and a finish certificate you can share.

What you need

  • An iPhone or Android phone with the latest version of eBrevet.
  • Your RUSA number.
  • To be registered for the event. Only registered riders can start or check in.
  • Your start code for the event, a 4-character code unique to you (section 2).
  • No paper card is required. In Arizona you choose how to prove your ride: eBrevet, a public GPS track, photos, or a paper card with receipts. Whatever you use, you must stop and check in at every staffed control. Details: Ride Verification.

1. Install and set up (once)

  1. Install eBrevet by CTNadovich from the Apple App Store or Google Play. If it’s already installed, update it. Look for this logo in the app store to make sure you’re installing the correct app.

  2. Open the app and enter your name and your RUSA number as Rider ID, then tap Continue. Your RUSA number must be exactly right: start codes only work with the right number.

  3. Choose Arizona. Tap the menu (☰, top left) ▸ Settings ▸ Event Information Source, choose the US region list, and pick AZ: Phoenix. The app starts out set to Pennsylvania.
  4. When the app asks, allow Location access. eBrevet needs it to know you’re at a control.

To change your name, RUSA number or region later, use ☰ ▸ Settings.

Optional: make the app quieter

If the app feels too chatty, ☰ ▸ Settings ▸ Preferences lets you switch off the extra messages:

  • Allow CheckIn Comment: the comment box at each check-in.
  • Enable Post Check-In Dialog: the message shown after each check-in.
  • Notifications for rider comments: pop-ups when other riders post comments.
  • Confetti Display for Finish: the celebration when you finish.

The same page has Can Delete Past Events (turn it on to delete rides under My Rides) and GPS Refresh Seconds (how often the app updates your position).

2. Before the ride

  1. Update the app in your app store.
  2. Download the events. On the main screen, tap Update event data while you have internet access. Arizona’s upcoming events appear as cards.
  3. Update again the day before. If the organizer changes a control, the start time or the route, your phone needs the new version.
  4. Have your start code ready. It is a 4-character code, different for every rider. The RBA emails it to you before the ride. Keep it handy so you can enter it within the hour before the start; the ride starter also has a copy if you forget it.

You need internet only to download the events and, ideally, to upload your check-ins. You don’t need it at controls.

3. Starting the ride

On the event day (everyone starts together)

  1. On the event’s card, tap RIDE.
  2. Enter your start code. You can do this up to an hour before the start.
  3. That’s it: the app checks you in at the start automatically, at the official start time. Ride when the organizer says go.

Pre-ride (volunteers)

  1. A PRE-RIDE button appears on the event card from about two weeks before the event until a day before it.
  2. Tap PRE-RIDE and enter your start code.
  3. At the start control, when the app asks whether to check in, say Yes. This starts your clock. If you say no, or you’re too far from the start, check in at the start control when you’re ready to go. Until you check in at the start, the other controls stay unavailable.

If the start code is refused

  • Update event data, then try again. Your phone may have an old version of the event.
  • Check for a typo.
  • Check your RUSA number in ☰ ▸ Settings. The code only works with the right number.
  • An older code still works after the organizer updates the route; the app just warns you.

4. Checking in at controls

  1. At each control, open eBrevet. A Check In button appears when you’re within about 500 m and the control is open.
  2. Tap Check In, add a comment if you like (other riders and the organizer can read it), then tap CHECK IN NOW.
  3. A confirmation shows a check-in phrase. You can note it down as an extra backup.

Green or orange check

  • Green: checked in and sent to the club.
  • Orange: checked in and saved on your phone, but not sent yet, usually because there’s no signal. It still counts.
  • When you have signal again, tap Resend Check-Ins (or Update Results) to turn orange checks green. Do this at the finish too, so the organizer has your full ride.

No Check In button?

  • Make sure you’re at the right place for this control (check your cue sheet).
  • Wait a few seconds, or tap GPS UPDATE: the app refreshes your position every 30 seconds or so.
  • Make sure eBrevet has Location permission in your phone’s settings.
  • The control may not be open yet. Check its open time on the control list.

Don’t skip a control

  • eBrevet doesn’t follow you, so it can’t warn you as you ride past a control. It notices only when you check in at the next one.
  • If you skip a control, you get no finish code and your ride is marked for RBA review. If you realize in time, go back and check in.
  • At a control you visit twice (a cloverleaf or out-and-back), the app may offer the check-in for your second visit. Don’t take it until you’ve actually ridden that loop; heed the app’s warning.

Running late?

Keep riding and keep checking in. A late check-in is marked LATE, and the RBA decides about your result. Info and photo controls have no closing time in the app. The finish closing time is the event’s overall time limit.

5. Finishing, stopping and your results

Finishing

  1. Check in at the finish control like any other.
  2. If you checked in at every control on time, the app shows your finish code and a CERTIFICATE button.
  3. When you have signal, make sure every check is green (tap Resend Check-Ins if not).

Taking a break or abandoning

  • To leave the ride screen without stopping, tap the back arrow at the top left. To return, tap CONTINUE RIDE on the event card.
  • To abandon (DNF), tap the black X next to Riding Now on the event card.
  • Changed your mind? If time hasn’t run out, tap RIDE again and the app resumes your ride.

Your past rides

  • ☰ ▸ My Rides keeps every ride: check-in times, finish code and certificate.
  • Tap CERTIFICATE, then the share icon, to save or share it.
  • My Rides is stored only on your phone. Uninstalling eBrevet erases it, so share or save certificates you want to keep.

6. Following other riders

In the app (needs internet)

Tap the check-list icon (☰✓) on an event card:

  • By Rider: every registered rider and the controls each has reached. Tap a rider for details.
  • By Time: the latest check-ins, newest first. Pre-ride check-ins don’t appear here.
  • Tap the event name at the top to refresh.

You’ll also see pop-up notices when other riders post comments. To turn them off, see “Optional: make the app quieter” in section 1.

For family and friends

The RBA emails every registered rider a link to the Arizona Randonneurs Rider Tracking page. It shows each rider’s check-in times and a map pin at their last check-in. Share the link with family and friends so they can follow your progress. It shows check-ins only, not your live location.

7. Troubleshooting

You see What to do
No events on the main screen Check the region is AZ: Phoenix (☰ ▸ Settings), then tap Update event data with internet.
An error about the signature, or events won’t download Update the app from the app store, then tap Update event data.
“INVALID CODE” when starting Update event data, check for a typo, and check your RUSA number in Settings.
No Check In button at a control Move closer, tap GPS UPDATE, allow Location access, and check that the control is open.
Orange check Fine: you’re checked in. Tap Resend Check-Ins once you have signal.
“Server said: NOT REGISTERED FOR THIS EVENT” You aren’t on the event’s rider list. Contact the RBA.
“Server said: UPDATE APP…” Your app is too old. Update it from the app store.
“Server said: INVALID DATA” Update the app and check your RUSA number; if it persists, tell the RBA. Your check-in is still saved on your phone.
Any other “Server said” message Your check-in is saved on the phone. Keep riding and tell the RBA afterwards.
App closed, phone restarted or in airplane mode No problem: eBrevet keeps your ride. Open it again at the next control.
Something odd ☰ ▸ Activity Log shows what the app is doing. Send a screenshot to the RBA.

8. Getting help

For any question about eBrevet, your start code, registration or an Arizona event, contact the RBA: mike@azrandos.com.

Sources

This guide condenses the official eBrevet documentation for Arizona riders. Both pages below include many screenshots of the app, if you’d like to see what each screen looks like: